r12Mov模具鋼修補焊絲 Cr12Mov模具氬弧焊焊條/1.0/1.2/1.6/2.0

ECuAl銅焊條Cu 237銅焊條ECuAl-A2銅合金焊條

Category
類 別

Trade-
Mark
牌 號

Equivalent to China Standard
相當國標

Characteristics & application
特性和用途

Equivalent to AWS
相當AWS

Hard-surfacing

硬

面

棧

焊

D 667

EDZCr-B-15

HRc48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part.
HRc48，耐磨、耐氣蝕、抗氧化。棧焊高爐料鐘、破碎機件

D 802

EDCoCr-A-03

HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter.
HRc38-47，耐熱、耐蝕、耐磨。棧焊高溫工件如熱剪切刀刃

ECoCr-A

D 812

EDCoCr-B-03

HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve.
HRc45-50，耐熱、耐蝕、耐磨。棧焊高溫工件如內燃機閥

ECoCr-B

D 822

HRc53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler.
HRc53，耐熱、耐磨，但抗沖擊性差。棧焊鍋爐旋轉葉輪

D 832

EDCoCr-C-03

HRc50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way.
HRc50，耐熱、耐磨。棧焊高溫工件如熱軋導軌

ECoCr-C

D 842

EDCoCr-D-03

HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die.
HRc28-38，耐蝕、抗熱疲勞，具有加工硬化性。棧焊熱鍛模

?

Cast iron

鑄

鐵

Z 308

EZNi

Pure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool.
純鎳，綜合性能好。鑄鐵薄件及加工面補焊用，如機床導衛

ENi-Cl

Z 408

EZNiFe

Iron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap.
鎳鐵，強度高、塑性好。重要灰鑄鐵及球鐵焊補用，如汽缸蓋

ENiFe-Cl

Z 508

EZNiCu-1

Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.
鎳銅，易加工，但抗裂性較差。不受力的灰鑄鐵加工面及砂眼補焊

ENiCu-B

?

Copper alloys

銅

合

金

Cu 107

ECu

Red copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row.
紫銅，耐大氣，海水腐蝕，導電性好。紫銅焊接用，如導電銅排

ECu

Cu 207

ECuSi

Silicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
硅青銅，耐蝕、強度高。銅、硅青銅及黃銅焊接用

ECuSi

Cu 227

ECuSnB

Tin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
錫磷青銅，耐蝕、強度高。銅、硅青銅及黃銅焊接用

ECuSn-C

Cu 237

ECuAl

Aluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.
鋁青銅，耐磨、耐蝕，強度高。銅合金焊接或棧焊用

ECuAl-A2

Aluminum alloys

鋁

合

金

Al 109

TAl

Pure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum.
純鋁，耐蝕性好，但強度不高，純鋁焊接用

E1100

Al 209

TAlSi

Silicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.
鋁硅，抗裂性好，通用性大。鋁合金焊接用，不宜焊接鋁鎂合金

E4043

Al 309

**n

Manganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.
鋁錳，強度高，耐蝕。鋁合金焊接用

E3003

Nickel alloys

鎳合金

Ni 102

ENi-1

Pure nickel. Welding and surfacing of nickel and nickel to steel.
純鎳，用于鎳、鎳與鋼的焊接與棧焊

ENi-1

Ni 207

ENiCu-7

Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel.
鎳銅，用于鎳銅、鎳銅與鋼的焊接與棧焊

???? 銀焊條成分及用途

? ??
?? HL301 Ag 10 Cu 53 Zn余量 主要用于鋼及鋼合金，鋼及硬質合金。
?? HL302 Ag 25 Cu 45 Zn余量 主要用于鋼合金，鋼及不銹鋼，都有良好的耐腐蝕性和導電性能。
?? HL303 Ag 45 Cu 30 Zn余量 熔點較低，有良好的侵流性和填滿間隔能力，焊縫光潔，耐沖擊性好。用于銅合金，鋼及不銹鋼。
?? HL304 Ag 50 Cu34 Zn余量? 主要性能和HL303銀基焊條基本相同。
?
?? HL306 Ag 65 Cu 20 Zn余量 主要用于銅及銅合金鋼，不銹鋼，等電氣設備。
?? HL307 Ag 75 Cu 26 Zn余量 主要用于制造電子管，真空容器件及電子原件，食品器皿，儀表，波導和電氣設備等多用途，適合銅及鎳設備。
?? HL308 Ag 72 Cu 22 Zn 余量主要用于制造電子管，真空容器件及電子原件，等多用途，適合銅及鎳設備。
?? HL312 Ag40.Cu.Zn.Cd 釬焊銅及銅合金、鋼及不銹鋼等
?? HL313 Ag50.Cu.Zn.Cd 釬焊銅及銅合金、鋼及不銹鋼等
?? HL321 Ag56.Cu.Zn.Sn 釬焊銅及銅合金、鋼及不銹鋼等
?? HL323 Ag30.Cu.Zn.Sn 釬焊銅及銅合金、鋼及不銹鋼等
?? HL325 Ag45.Cu.Zn.Sn 釬焊銅及銅合金、鋼及不銹鋼等
?? HL326 Ag38.Cu.Zn.Sn 釬焊銅及銅合金、鋼及不銹鋼等

?