美國漢黙模具焊條總代理電話

　　美國漢黙模具焊條總代理電話

　　美國漢黙模具焊條總代理

　　美國漢黙Weld Mold 954模具焊條總代理

　　萬得模?954

　　低碳鉻/鉬/鎢熱加工合金，具備優良的抗熱疲勞性。用于焊接修復和改造有損壞和磨損的模具，這些模具都是在熱檢查時有水冷卻問題或在焊接后必須進行機加工。此種合金有更柔合的產品 和稍硬，更耐磨的產品。適用于焊接和修理平鍛機、壓力機、模鍛錘和鍛造模具，以及AISI-H系列的在焊接后需要進行機加工的模具鋼。硬度RC 37-40

　　產品規格： NA

　　可用形式：手工電弧焊，藥芯焊絲，氬弧焊，氣體保護焊

　　Weld Mold 954

　　A machinable material especially designed for hot work applications. Special alloying agents produce the ultimate in homogeneous porous-free high-density weld deposits. Machinable weld deposits are obtained from Weld Mold 954 that incorporate excellent thermal shock and wear resistance as well as toughness.

　　Applications

　　Primarily used for overlays and complete impression welds on press forging dies. Other uses that are suited for this material include upsetter insert dies, hammer dies, wearing surfaces and all A.I.S.I. series hot work tool steels where machinable welds are necessary. Not recommended for use in working areas of aluminum die casting dies.

　　Procedure

　　For touchup repairs on forging dies a localized preheat of 400o F to 500o F is sufficient with a slow cool. Be sure to remove all oxides and other foreign matter from the area before welding. For full impression welds on die blocks preheat to 900o F. Maintain interpass temperature during welding. After welding, cool in still air to 300o F to obtain ultimate grain refinement. Temper at 1050o F for one hour per inch of thickness.

　　SMAWGMAWGTAWFCAW

　　92% Ar 8% CO2 or

　　Ar

　　Ar

　　 CO2 or

　　75% Ar 25% CO2

　　Available Processes: SMAW, GMAW, GTAW and FCAW

　　Hardness: Rockwell 36-40, SMAW and FCAW

　　RC for GTAW and GMAW will run 3-4 points lower