供應**現代Superflux300 SA-625鎳合金焊絲

備注：一口價為1公斤的價格，每箱為15公斤!

Superflux300 SA-625

Applications?

Used for welding heat resisting alloys including Inconel 601, Incoloy 800/800H or combination of
these with other alloys for furnace equipments, petrochemical plants and power generation plants.
Characteristics on Usage
Superflux300 is a inert flux that composition of Si and Mn is hardly changed though welding
condition is changed, and superflux300 is a bonded type flux and a high basicity flux.

Excellent arc stability and slag release.
Both its bead appearance and weldability are good.
Notes on Usage
Dry the flux at 300350 for 60 minutes before use.
No preheat required and maximum interpass of 250. When welding superaustenitic
alloys the interpass temperature should be controlled to a maximum of 100.