由于產品型號眾，網站不能全部展示，更多產品型號，請來電咨詢！
上海斯米克電焊條簡介
? ? ? ? ??
?
<Category
類?別
Trade-
Mark
牌?號
Equivalent to China Standard
相當國標
Characteristics & application
特性和用途
Equivalent to AWS
相當AWS
?
Hard-surfacing
硬
面
?
棧
?
焊
?
D 667
EDZCr-B-15
HRc48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part.
HRc48，耐磨、耐氣蝕、抗氧化。棧焊高爐料鐘、破碎機件
D 802
EDCoCr-A-03
HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter.
HRc38-47，耐熱、耐蝕、耐磨。棧焊高溫工件如熱剪切刀刃
ECoCr-A
D 812
EDCoCr-B-03
HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve.
HRc45-50，耐熱、耐蝕、耐磨。棧焊高溫工件如內燃機閥
ECoCr-B
D 822
HRc53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler.
HRc53，耐熱、耐磨，但抗沖擊性差。棧焊鍋爐旋轉葉輪
D 832
EDCoCr-C-03
HRc50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way.
HRc50，耐熱、耐磨。棧焊高溫工件如熱軋導軌
ECoCr-C
D 842
EDCoCr-D-03
HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die.
HRc28-38，耐蝕、抗熱疲勞，具有加工硬化性。棧焊熱鍛模
?
?
Cast iron
?
鑄
?
鐵
Z 308
EZNi
Pure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool.
純鎳，綜合性能好。鑄鐵薄件及加工面補焊用，如機床導衛
ENi-Cl
Z 408
EZNiFe
Iron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap.
鎳鐵，強度高、塑性好。重要灰鑄鐵及球鐵焊補用，如汽缸蓋
ENiFe-Cl
Z 508
EZNiCu-1
Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.
鎳銅，易加工，但抗裂性較差。不受力的灰鑄鐵加工面及砂眼補焊
ENiCu-B
?
?
Copper alloys
?
銅
?
合
?
金
Cu 107
ECu
Red copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row.
紫銅，耐大氣，海水腐蝕，導電性好。紫銅焊接用，如導電銅排
ECu
Cu 207
ECuSi
Silicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
硅青銅，耐蝕、強度高。銅、硅青銅及黃銅焊接用
ECuSi
Cu 227
ECuSnB
Tin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
錫磷青銅，耐蝕、強度高。銅、硅青銅及黃銅焊接用
ECuSn-C
Cu 237
ECuAl
Aluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.
鋁青銅，耐磨、耐蝕，強度高。銅合金焊接或棧焊用
ECuAl-A2
?
Aluminum alloys
?
鋁
合
金
Al 109
TAl
Pure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum.
純鋁，耐蝕性好，但強度不高，純鋁焊接用
E1100
Al 209
TAlSi
Silicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.
鋁硅，抗裂性好，通用性大。鋁合金焊接用，不宜焊接鋁鎂合金
E4043
Al 309
**n
Manganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.
鋁錳，強度高，耐蝕。鋁合金焊接用
E3003
?
Nickel alloys
鎳合金
Ni 102
ENi-1
Pure nickel. Welding and surfacing of nickel and nickel to steel.
純鎳，用于鎳、鎳與鋼的焊接與棧焊
ENi-1
Ni 207
ENiCu-7
Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel.
鎳銅，用于鎳銅、鎳銅與鋼的焊接與棧焊
ENiCu-7
?
<Category
類?別
Trade
mark
牌?號
Chemical composition
主要成份
Characteristics & application
特性和用途
Equivalent to AWS
相當AWS
?
Hardfacing
?
硬
?
面
?
棧
?
焊
S 101
C3 Cr28 Ni4
Si3.5 Fe Rem.
HRc48-54. Resistance to wear, gas corrosion and oxidation. Hardfacing of bucket tooth and case pump.
HRc48-54，耐磨、耐氣蝕、抗氧化。棧焊鏟斗齒，泵套
S 111
C1 Cr29 W5
Co Rem.
HRc38-47. Resistance to wear and corrosion at high-temperature. Hardfacing of high temperature and pressure valve.
HRc38-47，高溫下耐磨、耐蝕。棧焊高溫高壓閥門
ECoCr-A
S 112
C1.5 Cr29 W8
Co Rem.
HRc45-50. Resistance to wear and corrosion at high-temperature. Hardfacing of valve and hot-rolling pass.
HRc45-50，高溫下耐磨、耐蝕。棧焊閥門，熱軋孔型
ECoCr-B
S 113
C2.5 Cr30 W17
Co Rem.
HRc55. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of screw charging carriage.
HRc55，高溫下耐磨、耐熱，但抗沖擊性差。棧焊螺旋送料機用
S 114
C2.5 Cr30 W12
Co Rem.
HRc53. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of three-cone bit.
HRc53，高溫下耐磨、耐熱，但抗沖擊較差。棧焊牙輪鉆頭
ECoCr-C
?
Copper
alloys
?
?
銅
?
?
合
?
?
金
S 201
Sn1 Si0.3Mn0.3
Cu Rem.
Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper.
機械性能好，抗裂性好。紫銅氣焊及氬弧焊用
ERCu
S 211
Si3 Mn1
Cu Rem.
Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel.
機械性能好，銅合金氬弧焊及鋼的MIG釬焊用
ERCuSi-Al
S 212
Sn5 Cu Rem.
Wear resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨性好。銅合金氬弧焊及鋼的棧焊用
ERCuSn-A
S 213
Sn8 Cu Rem.
Wear resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨性好。銅合金氬弧焊及鋼的棧焊用
ERCuSn-C
S 214
Al7.5 Cu Rem.
Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨、耐蝕。銅合金氬弧焊及鋼的棧焊用
ERCuAl-A1
S 215
Al9 Cu Rem.
Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨、耐蝕。銅合金氬弧焊及鋼的棧焊用
ERCuAl-A2
S 221
Cu60 Sn1 Si0.3
Zn Rem.
Melting point is about 890. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔點約890。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵
S 221F
Cu60 Sn1 Si 0.3
Zn Rem.
S221 welding rod coated with flux.
外涂焊劑的S221焊絲
S 222
Cu58Sn0.9Si0.1
Fe0.8 Zn Rem.
Melting point is about 880. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔點約880。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵
RBCuZn-C
S 222F
Cu58Sn0.9Si0.1
Fe0.8 Zn Rem.
S222 welding rod coated with flux.
外涂焊劑的S222焊絲
RBCuZn-C
S 223
Cu59 Sn0.6
Zn Rem.
Melting point is about 900. Braze welding of copper, steel and cast iron.
熔點約900。銅、鋼、鑄鐵釬焊用
RBCuZn-A
S 224
Cu62 Si0.5
Zn Rem.
Melting point is about 905. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔點約905。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵
Copper
alloys
銅
?
合
?
金
S 225
Cu48 Ni10
Zn Rem.
Melting point is about 935?and high strength. Braze welding of steel, nickel and carbide alloys.
熔點約935。高強度,釬焊鋼、鎳及硬質合金用
RBCuZn-D
S 225F
Cu48 Ni10
Zn Rem.
S225 welding rod coated with flux.
外涂焊劑的S225焊絲
RBCuZn-D
S 226
Cu60 Sn0.3
Si0.2 Zn Rem.
Melting point is about 900. Gas welding of brass, also braze welding of copper, steel and cast iron.
熔點約900。黃銅氣焊用，也可釬焊銅、鋼、鑄鐵
S 227
Cu58Sn0.9Ni0.5
Si0.1 Fe0.8
Zn Rem.
Melting point is about 880. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔點880。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵
RBCuZn-B
S 229
Cu55 Ni6 Mn4
Zn余
Melting point is about 920, high strength. Braze welding of steel, nickel and hard carbide.
熔點約920。高強度,釬焊鋼、鎳及硬質合金用
Aluminum alloys
?
鋁
?
合
?
金
S 301
Al99.5
Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum.
塑性好、耐蝕。純鋁氣焊、氬弧焊用
ER1100
S 311
Si5 Al Rem.
Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys.
抗裂性好，通用性大。鋁合金氣焊、氬弧焊用。不宜用高鎂合金
ER4043
S 321
Mn1.3 Al Rem.
Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys.
良好的耐蝕性、可焊性及塑性。鋁合金氣焊、氬弧焊用
S 331
Mg5 Mn0.4
Al Rem.
Corrosion resistance and high strength. Argon arc welding of aluminum alloys.
耐蝕，強度高。鋁合金氬弧焊用
ER5183
?
?
<Category
類?別
Trade-mark
牌號
Specification
規?格
Melting
Point
熔點
Chemical
composition
主要成份
Application
用?途
?
Equivalent
to AWS
相當AWS
?
Copper
zinc
銅鋅
L103
Wire & rod
絲
885-888
Cu54 Zn Rem.
Brazing of copper, bronze and steel, subjected to low load.
釬焊銅、青銅和鋼等受力不大工件
L104
Foil
箔
890-930
Cu57 Mn2
Co2 Zn Rem.
Brazing of carbide cutting tool.
釬焊硬質合金刀具
?
Copper
phosphorus
?
?
銅磷
L201
Cast rod, wire & rod, powder
鑄條、絲、粉
710-800
P7 Cu Rem.
Brazing of copper and copper alloys.
釬焊銅及銅合金
BCuP-2
L204
Cast rod, wire
鑄條、絲
640-815
P5 Ag15
Cu Rem.
Brazing of copper, copper alloys, silver and molybdenum etc.
釬焊銅及銅合金、銀、鉬等金屬。
BCuP-5
L205
Cast rod, wire & rod, powder
鑄條、絲、箔
640-800
P6 Ag5
Cu Rem.
Brazing of copper and copper alloys.
釬焊銅及銅合金
BCuP-3
L207
Cast rod, wire & rod
鑄條、絲
640-770
P7 Ag5
Cu Rem.
Brazing of copper and copper alloys.
釬焊銅及銅合金
BCuP-7
L209
Cast rod, wire
鑄條、絲
684-710
P7 Ag2
Cu Rem.
Brazing of copper and copper alloys.
釬焊銅及銅合金。
BCuP-6
?
Silver
base
?
銀基
L302
Wire & rod
絲
745-775
Ag25 Cu40
Zn Rem.
Brazing of copper, copper alloys, steel and stainless steel etc.
釬焊銅及銅合金、鋼及不銹鋼等
L303
Wire & rod
絲
660-725
Ag45 Cu30
Zn余
Brazing of copper, copper alloys, steel and stainless steel etc.
釬焊銅及銅合金、鋼及不銹鋼等
BAg-5
L303F
Flux coated rod
涂藥絲
660-725
Ag45 Cu30
Zn Rem.
L303 coated with flux, the same application as L303.
外涂釬劑的L303，用途與L303相同
BAg-5
L304
Foil
箔
690-775
Ag50 Cu34
Zn Rem.
Brazing of copper, copper alloys and steel etc.
釬焊銅及銅合金、鋼等
BAg-6
L308
Wire & rod
絲
779-780
Ag72 Cu Rem.
Brazing of copper and nickel under vacuum or reducing protective atmosphere.
銅和鎳的真空或還原保護氣氛釬焊
BAg-8
L312
Wire & rod
絲
595-605
Ag40.Cu.Zn.Cd
Brazing of copper, copper alloys, steel and stainless steel etc.
釬焊銅及銅合金、鋼及不銹鋼等
L313
Wire & rod
絲
625-635
Ag50.Cu.Zn.Cd
Brazing of copper, copper alloys, steel and stainless steel etc.
釬焊銅及銅合金、鋼及不銹鋼等
BAg-1a
L321
Wire & rod
絲
615-650
Ag56.Cu.Zn.Sn
Brazing of copper, copper alloys, steel and stainless steel etc.
釬焊銅及銅合金、鋼及不銹鋼等
BAg-7
L323
Wire & rod
絲
665-755
Ag30.Cu.Zn.Sn
Brazing of copper, copper alloys, steel and stainless steel etc.
釬焊銅及銅合金、鋼及不銹鋼等
L325
Wire & rod
絲
645-685
Ag45.Cu.Zn.Sn
Brazing of copper, copper alloys, steel and stainless steel etc.
釬焊銅及銅合金、鋼及不銹鋼等
BAg-36
L326
Wire & rod
絲
650-720
Ag38.Cu.Zn.Sn
Brazing of copper, copper alloys, steel and stainless steel etc.
釬焊銅及銅合金、鋼及不銹鋼等
BAg-34
?
Aluminum base
鋁基
L400
Cast rod, wire & rod
鑄條、絲
577-582
Si11.5
Al Rem.
Brazing of aluminum and aluminum alloys.
鋁及鋁合金的釬焊
BAlSi-4
L401
Cast rod
鑄條
525-535
Si5 Cu28
Al Rem.
Brazing of aluminum and aluminum alloys.
鋁及鋁合金的釬焊
?
Tin lead
錫鉛
L600
Wire & rod
絲
183-185
Sn60 Sb0.8
Pb Rem.
Soldering of fusible metals and heat-treated part.
易熔金屬及熱處理件的釬焊
60Sn
L601
Wire & rod
絲
183-227
Sn18 Sb2
Pb Rem.
Soldering of copper, copper alloys and galvanized iron plain sheet.
銅及銅合金、鍍鋅鐵皮的釬焊。
18Sn
L602
Wire & rod
絲
183-256
Sn30 Sb2
Pb Rem.
Soldering of copper, brass, copper alloys and galvanized iron plain sheet.
銅、黃銅、鐵、鍍鋅鐵皮的釬焊
30Sn
L603
Wire & rod
絲
183-235
Sn40 Sb2
Pb Rem.
Soldering of copper, copper alloys, steel and zinc parts.
銅及銅合金、鋼、鋅制零件的釬焊
40Sn
L604
Wire & rod
絲
183-222
Sn90 Sb0.15
Pb Rem.
Soldering of copper and steel for food and medicine field.
食品、醫療所需銅、鋼等金屬的釬焊
90Sn
L605
Wire & rod
絲
232-240
Ag5 Sn95
Soldering of copper and steel for electrical and food field.
電器、食品所需銅、鋼等金屬的釬焊
L608
Wire & rod
絲
295-305
Sn5.5 Ag2.5
Pb Rem.
Soldering of copper, copper alloys, steel and stainless steel.
銅及銅合金、鋼及不銹鋼的釬焊
Nickel base
鎳基
L702
Powder
粉
970-1000
Cr7 B3 Si4
Ni Rem.
Brazing of stainless steel under vacuum or protective atmosphere.
不銹鋼真空或保護氣氛釬焊
BNi-2
?
<Category
類?別
Trade-mark
牌?號
Product name
名?稱
Characteristics & application
特性和用途
Gas
welding
氣焊
CJ301
Copper gas welding flux
銅氣焊熔劑
Melting point is about 650, flux for gas welding and brazing of copper and copper alloys.
熔點約650，銅及銅合金氣焊或釬焊的助熔劑
CJ401
Aluminum gas welding flux
鋁氣焊熔劑
Melting point is about 560, flux for gas welding of aluminum and aluminum alloys.
熔點約560，鋁及鋁合金氣焊的助熔劑
?
Silver
brazing
銀釬焊
QJ101
Silver brazing flux
銀釬焊熔劑
Brazing flux of copper, copper alloys, steel and stainless steel within 550-750.
在550-750范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑
QJ102
Silver brazing flux
銀釬焊熔劑
Brazing flux of copper, copper alloys, steel and stainless steel within 600-850.
在600-850范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑
QJ102A
Silver brazing flux
銀釬焊熔劑
Brazing flux of copper, copper alloys, steel and stainless steel within 600-850. Non agglomeration.
在600-850范圍釬焊銅及銅合金、鋼及不銹鋼。不易結塊
QJ112
Silver brazing paste flux
膏狀銀釬焊熔劑
Brazing flux of copper, copper alloys, steel and stainless steel within 600-850.
在600-850范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑
QJ103
Silver brazing flux
銀釬焊熔劑
Brazing flux of copper, copper alloys, steel and stainless steel within 550-750.
在550-750范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑
中國焊接網
公眾號
在線客服